News Center

News Center

Installation requirements for atomic absorption spectrometers!

发布时间: 2022-12-12 10:24

Atomic absorption spectrometer It can measure a wide range of elements, and different models of atomic absorption spectrometers are capable of analyzing distinct elemental species. The fundamental principle underlying atomic absorption spectroscopy is that light emitted by the instrument’s source—containing the characteristic spectral lines of the element being measured—is absorbed by ground-state atoms of that element in the sample vapor. The concentration of the target element in the sample is determined from the degree of attenuation of the characteristic spectral line. Atomic absorption spectrometers are versatile, with flame atomic absorption spectroscopy achieving detection limits as low as 10⁻⁹ g/mL, and graphite furnace atomic absorption spectroscopy reaching even lower levels, down to 10⁻¹³ g/mL. Below, we outline the installation requirements for atomic absorption spectrometers; those interested are encouraged to review them.

1. Environment

The experiment should be conducted in a location free from strong magnetic fields and thermal radiation, and not near equipment or workshops that generate significant vibrations. The laboratory must be kept clean. The temperature should be maintained between 10 and 30°C, with relative humidity below 80%. Instruments should be protected from direct sunlight, smoke, polluted airflows, and water vapor, and shielded from the effects of corrosive gases.

2. Test bench

The structure must be sturdy and stable, and the work surface should be level. To facilitate operation and maintenance, sufficient clearance should be provided around the test bench.

3. Exhaust Hood

A fume hood must be installed above the atomic absorption spectrophotometer to ensure the smooth removal of combustion gases produced by the burner.

4. Power Supply

Each brand of atomic absorption spectrophotometer and its accessories has a different allowable voltage range and power rating; be sure to configure the system according to the instruction manual before use. The general requirements are as follows: employ a three-phase power supply to power the instrument, computer, and printer, with a voltage of 220 V ± 10%; a regulated power supply rated at over 1 kVA is strongly recommended. A separate phase should be dedicated to the graphite furnace power supply, typically operating at currents of 150–300 A, which can be connected directly without requiring a regulated power source. A third phase is reserved for the air compressor, air conditioning, and exhaust equipment, ensuring stable performance and safe operation of the instrument. The instrument’s grounding wire must be connected to a metal plate buried one meter underground.

5. Cooling Water

Equipped with a water circulation system, the graphite furnace chamber is prone to scale buildup when using hard tap water.

6. Gas Supply

Gas cylinders should not be stored in the instrument room; instead, they should be kept in a secure, well-ventilated room located as close as possible to the main unit.

The above is an overview of the installation requirements for atomic absorption spectrometers. For more information, please continue browsing our website!

Latest News

Recommended Products

RoHS 2.0 Rapid Screening Instrument PY-GCMS3080

This page provides information, including frequently asked questions, about the RoHS 2.0 rapid screening instrument PY‑GCMS3080. For pricing inquiries, please contact us online or call our hotline at 19926823034!

Learn more+

RoHS 2.0 Rapid Screening Instrument PY-GCMS3080

RoHS 1.0 Rapid Testing Instrument DX-320L Pro

This page provides an introduction to the DX-320L Pro, a high-performance desktop XRF analyzer compliant with RoHS 1.0. For more information, please contact 19926823034.

Learn more+

RoHS 1.0 Rapid Testing Instrument DX-320L Pro

RoHS 1.0 Detector – IDP8300L Fluorescence Spectrometer

This page provides specifications and FAQs for the DP8300L fluorescence spectrometer. For pricing inquiries, please contact us online or call 19926823034!

Learn more+

RoHS 1.0 Detector – IDP8300L Fluorescence Spectrometer

RoHS Six-Item Detector – DX-360 Fluorescence Spectrometer

This page provides specifications and FAQs for the DX-360 fluorescence spectrometer. For pricing inquiries, please contact us online or call 19926823034!

Learn more+

RoHS Six-Item Detector – DX-360 Fluorescence Spectrometer

RoHS 2.0 Pyrolysis Gas Chromatograph PY-DP8060

This page provides specifications for the RoHS 2.0 pyrolysis gas chromatograph PY-DP8060, along with FAQs and other information. For a quote, please contact us online or call our hotline at 19926823034!

Learn more+

RoHS 2.0 Pyrolysis Gas Chromatograph PY-DP8060

Halogen detection instrument

This page provides specifications and FAQs for the IDP-6300 halogen detector. For pricing inquiries, please contact us online or call our hotline at 19926823034.

Learn more+

Halogen detection instrument

Frequently Asked Questions

What is RoHS?

RoHS is a mandatory standard established by EU legislation, officially known as the “Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment.” The standard entered into force on July 1, 2006, and primarily aims to regulate the materials and manufacturing processes of electrical and electronic products, thereby promoting human health and environmental protection.

The purpose of this standard is to eliminate six substances—lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers (note: the correct Chinese term for PBDE is “polybrominated diphenyl ethers”; “polybrominated biphenyl ethers” is an incorrect designation)—and specifically stipulates that the cadmium content must not exceed 0.01%.

The latest RoHS Directive has added four new phthalate‑ester testing items: DEHP—di(2‑ethylhexyl) phthalate; BBP—butyl benzyl phthalate; DBP—dibutyl phthalate; and DIBP—diisobutyl phthalate.

What are the limit values for the ten hazardous substances under RoHS?

1. Cadmium: less than 100 ppm.

2. Lead: less than 1000 ppm.

3. Mercury: less than 1000 ppm.

4. Hexavalent chromium: less than 1000 ppm.

5. Polybrominated biphenyls (PBB): less than 1000 ppm.

6. Polybrominated diphenyl ethers (PBDEs): less than 1000 ppm.

7. Di(2-ethylhexyl) phthalate (DEHP): less than 1000 ppm.

8. Butyl benzyl phthalate (BBP): less than 1000 ppm.

9. Dibutyl phthalate (DBP): less than 1000 ppm.

10. Diisobutyl phthalate (DIBP): less than 1000 ppm.

What instruments are typically used for RoHS testing?

The commonly used analytical instrument for RoHS 1.0 is X-ray fluorescence spectroscopy (XRF). XRF analyzers are available in standalone, benchtop, and handheld configurations. Typically, a handheld XRF analyzer is employed first for portable on-site testing, with a focus on components of the product that pose a higher risk of containing restricted substances.

With the introduction of RoHS 2.0, four phthalate esters have been added to the RoHS Directive, necessitating additional testing to determine the levels of these compounds, which are extracted using solvents. The solvent extracts are then analyzed for the presence of phthalates by gas chromatography–mass spectrometry (GC/MS) or gas chromatography with flame ionization detection (GC/FID). Other elements and polybrominated diphenyl ethers/alkylated elastomers are analyzed using comparative methods and GC/MS, respectively.

Do the ten RoHS items require two instruments for testing?

The ten items specified in RoHS require two instruments for testing.
For the ten‑item RoHS testing, two instruments are required to complete the analysis; a single instrument cannot achieve this. Even if one instrument is used to measure heavy metal content, the other must be employed to analyze organic compounds.
X-ray fluorescence spectrometers are used to detect RoHS 1.0, while chromatographs, pyrolyzers, or hyphenated techniques such as GC–MS are employed to analyze the four phthalates specified in RoHS 2.0. At present, no single instrument can independently perform all the tests required for RoHS 2.0.

Can ROHS testing instruments detect metallic elements?

ROHS testing instruments are specialized devices used to detect the presence of hazardous substances in electronic components, household appliances, toys, and other products. These harmful substances can pose long-term risks to both human health and the environment, making the use of ROHS testing equipment of paramount importance.

Regarding whether ROHS testing instruments can detect metallic elements, the answer is yes. This is because ROHS testing covers not only hazardous substances but also the analysis of metallic constituents in compliant products. These metals include lead, cadmium, mercury, and others, which are widely used during the manufacturing process. Although these elements are essential, their excessive use poses significant risks to human health and the environment. Consequently, the advent of ROHS testing instruments has greatly facilitated the detection of metallic elements.

< 12 >