[DePu Instruments] – A manufacturer specializing in testing instruments for RoHS compliance, heavy metals, alloy analysis, halogens, and more!
Product Inquiry:19926823034(WeChat ID is the same)
- All
- Product Management
- News and Information
- Introduction Content
- Corporate outlets
- Frequently Asked Questions
- Corporate Video
- Corporate Portfolio
RoHS 2.0 instrument RoHS 1.0 instrument
Alloy analyzerCoating Analyzer
Applications of Cadmium Analyzers in Aquatic Environments!
发布时间: 2022-11-14 10:53
In nature, cadmium is a toxic metallic element that occurs in the form of cadmium sulfide ores. It is characterized by its resistance to degradation, low acute toxicity, high chemical stability, and bioaccumulative properties. These traits contribute to the continuous accumulation of cadmium in aquatic environments, posing significant health risks to humans. In this chapter, we will explore what measures can be taken to mitigate the hazards posed by cadmium in water systems. Today, we will discuss… Cadmium analyzer Applications in aquatic environments!
I. The Hazards of Cadmium in Water!
Cadmium has extremely broad industrial applications; for example, it is used as an alloying element to produce numerous alloys, such as hard copper alloys that exhibit both high tensile strength and excellent wear resistance, with cadmium content ranging from 0.5% to 1.0%. Cadmium–nickel alloys serve as bearing materials in aircraft engines, with cadmium comprising about 12% of the alloy. Notably, due to its large thermal neutron capture cross-section, alloys containing silver, indium, and cadmium are employed as control rods in nuclear reactors. Cadmium compounds are widely utilized in the production of yellow pigments, plastic stabilizers, phosphors for television picture tubes, insecticides, fungicides, and paints. In addition, cadmium is used in electroplating and in rechargeable batteries.
Cadmium compounds are highly toxic, and their toxicity can be amplified by synergistic effects with other elements. Cadmium is absorbed by the human body through inhalation and can act as a metalloestrogen, irritating the respiratory tract. Prolonged exposure may lead to loss of smell, yellowish discoloration of the gums or the gradual appearance of yellow rings around them, and it can accumulate in the liver or kidneys, causing damage—particularly to the kidneys—and even resulting in osteoporosis and bone softening. It is now widely recognized that severe cadmium exposure can cause connective tissue damage, reproductive system dysfunction, kidney injury, teratogenicity, and carcinogenicity, including an increased risk of breast cancer in humans. Cadmium is extremely toxic, and air and food contaminated with cadmium pose serious health hazards to humans.
II. As can be seen, once cadmium‑contaminated drinking water or wastewater is discharged, it can lead to serious consequences. To mitigate the hazards posed by cadmium, it is essential to test for its presence in water. Therefore, it is necessary to use a cadmium detector to measure cadmium levels in water.
There are numerous methods for detecting cadmium in water, such as the acid‑oxidation method and dithizone colorimetry. A pre‑treated water sample is injected into a digestion reaction vessel using a syringe pump. The sample first reacts with an acidic oxidizing agent, uniformly converting all forms of cadmium to divalent cadmium. The solution’s pH is then adjusted to a strongly alkaline level, after which a specific chromogenic reagent is added to facilitate extraction and a color‑development reaction. Within the measurement range, the degree of color change is directly proportional to the cadmium concentration in the water sample. By quantifying the color change, the cadmium content in the sample can be determined. Online extraction technology can significantly lower the detection limit of on‑line cadmium analyzers, enabling these instruments to provide real‑time, continuous monitoring of dissolved cadmium levels across various industries.
Latest News
Recommended Products
Frequently Asked Questions
What is RoHS?
RoHS is a mandatory standard established by EU legislation, officially known as the “Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment.” The standard entered into force on July 1, 2006, and primarily aims to regulate the materials and manufacturing processes of electrical and electronic products, thereby promoting human health and environmental protection.
The purpose of this standard is to eliminate six substances—lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers (note: the correct Chinese term for PBDE is “polybrominated diphenyl ethers”; “polybrominated biphenyl ethers” is an incorrect designation)—and specifically stipulates that the cadmium content must not exceed 0.01%.
The latest RoHS Directive has added four new phthalate‑ester testing items: DEHP—di(2‑ethylhexyl) phthalate; BBP—butyl benzyl phthalate; DBP—dibutyl phthalate; and DIBP—diisobutyl phthalate.
What are the limit values for the ten hazardous substances under RoHS?
1. Cadmium: less than 100 ppm.
2. Lead: less than 1000 ppm.
3. Mercury: less than 1000 ppm.
4. Hexavalent chromium: less than 1000 ppm.
5. Polybrominated biphenyls (PBB): less than 1000 ppm.
6. Polybrominated diphenyl ethers (PBDEs): less than 1000 ppm.
7. Di(2-ethylhexyl) phthalate (DEHP): less than 1000 ppm.
8. Butyl benzyl phthalate (BBP): less than 1000 ppm.
9. Dibutyl phthalate (DBP): less than 1000 ppm.
10. Diisobutyl phthalate (DIBP): less than 1000 ppm.
What instruments are typically used for RoHS testing?
The commonly used analytical instrument for RoHS 1.0 is X-ray fluorescence spectroscopy (XRF). XRF analyzers are available in standalone, benchtop, and handheld configurations. Typically, a handheld XRF analyzer is employed first for portable on-site testing, with a focus on components of the product that pose a higher risk of containing restricted substances.
With the introduction of RoHS 2.0, four phthalate esters have been added to the RoHS Directive, necessitating additional testing to determine the levels of these compounds, which are extracted using solvents. The solvent extracts are then analyzed for the presence of phthalates by gas chromatography–mass spectrometry (GC/MS) or gas chromatography with flame ionization detection (GC/FID). Other elements and polybrominated diphenyl ethers/alkylated elastomers are analyzed using comparative methods and GC/MS, respectively.
Do the ten RoHS items require two instruments for testing?
The ten items specified in RoHS require two instruments for testing.
For the ten‑item RoHS testing, two instruments are required to complete the analysis; a single instrument cannot achieve this. Even if one instrument is used to measure heavy metal content, the other must be employed to analyze organic compounds.
X-ray fluorescence spectrometers are used to detect RoHS 1.0, while chromatographs, pyrolyzers, or hyphenated techniques such as GC–MS are employed to analyze the four phthalates specified in RoHS 2.0. At present, no single instrument can independently perform all the tests required for RoHS 2.0.
Can ROHS testing instruments detect metallic elements?
ROHS testing instruments are specialized devices used to detect the presence of hazardous substances in electronic components, household appliances, toys, and other products. These harmful substances can pose long-term risks to both human health and the environment, making the use of ROHS testing equipment of paramount importance.
Regarding whether ROHS testing instruments can detect metallic elements, the answer is yes. This is because ROHS testing covers not only hazardous substances but also the analysis of metallic constituents in compliant products. These metals include lead, cadmium, mercury, and others, which are widely used during the manufacturing process. Although these elements are essential, their excessive use poses significant risks to human health and the environment. Consequently, the advent of ROHS testing instruments has greatly facilitated the detection of metallic elements.
