[DePu Instruments] – A manufacturer specializing in testing instruments for RoHS compliance, heavy metals, alloy analysis, halogens, and more!
Product Inquiry:19926823034(WeChat ID is the same)
- All
- Product Management
- News and Information
- Introduction Content
- Corporate outlets
- Frequently Asked Questions
- Corporate Video
- Corporate Portfolio
RoHS 2.0 instrument RoHS 1.0 instrument
Alloy analyzerCoating Analyzer
Applications of the full-spectrum direct-reading spectrometer!
发布时间: 2022-09-15 11:02
Full-spectrum direct-reading spectrometer Its analytical speed is unmatched by other methods. In Spectrometer During the analysis, multiple elements in the sample can be determined simultaneously. Given the diversity of samples being analyzed, operators of a full-spectrum direct-reading spectrometer should be adept at developing appropriate analytical methods tailored to the specific task at hand and clearly prioritize high accuracy—i.e., low measurement error—in quantitative analysis. Below, we present several examples of applications for full-spectrum direct-reading spectrometers; those interested are encouraged to learn more.
I. Rare Earth Element Analysis
Unidirectional spark source emission spectroscopy has been employed to analyze steel‑ and aluminum‑borne alloying elements, yet conventional wet‑chemical methods or other instrumental techniques struggle to quantify rare earth elements. This is because alloying elements exhibit highly similar chemical and physical properties and are present at very low concentrations in most materials. Direct‑reading spectrometers offer an effective approach for such analyses. Rare earth elements in steel and aluminum can be rapidly determined alongside other constituents without incurring additional costs.
II. Analysis of Rare Earth Elements in Steel
In iron-based materials, the incorporation of rare earth elements—through the formation of rare earth sulfides and oxides—can remove sulfide inclusions, thereby enhancing the plasticity and ductility of these materials during rolling; conversely, their absence can compromise toughness. In cast irons, rare earth elements also form rare earth sulfides, which effectively promote spheroidization of carbon. The amount of rare earth material added to cast iron depends on the quantity required to achieve carbon spheroidization. However, at present, most foundries use magnesium to treat ductile cast iron, as rare earth elements are relatively expensive. Given China’s abundant rare earth resources, rare earth elements are typically added to steels. In principle, cerium and other rare earths are incorporated into high‑strength low‑alloy steels to reduce cracking that may occur in laminated microstructures during welding and joining. For this project, we first selected suitable elemental spectral lines and constructed calibration curves, followed by an evaluation of the analytical precision and accuracy.
III. Applications: The full-spectrum direct-reading spectrometer is widely applicable to the compositional analysis of metallic samples, including iron-based, aluminum-based, copper-based, nickel-based, zinc-based, titanium-based, cobalt-based, magnesium-based, tin-based, and lead-based alloys.
The above is an introduction to the applications of full-spectrum direct-reading spectrometers. If you would like to learn more about… Full-spectrum direct-reading spectrometer information Yes, you can continue to visit our website or contact us!
Latest News
Recommended Products
Frequently Asked Questions
What is RoHS?
RoHS is a mandatory standard established by EU legislation, officially known as the “Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment.” The standard entered into force on July 1, 2006, and primarily aims to regulate the materials and manufacturing processes of electrical and electronic products, thereby promoting human health and environmental protection.
The purpose of this standard is to eliminate six substances—lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers (note: the correct Chinese term for PBDE is “polybrominated diphenyl ethers”; “polybrominated biphenyl ethers” is an incorrect designation)—and specifically stipulates that the cadmium content must not exceed 0.01%.
The latest RoHS Directive has added four new phthalate‑ester testing items: DEHP—di(2‑ethylhexyl) phthalate; BBP—butyl benzyl phthalate; DBP—dibutyl phthalate; and DIBP—diisobutyl phthalate.
What are the limit values for the ten hazardous substances under RoHS?
1. Cadmium: less than 100 ppm.
2. Lead: less than 1000 ppm.
3. Mercury: less than 1000 ppm.
4. Hexavalent chromium: less than 1000 ppm.
5. Polybrominated biphenyls (PBB): less than 1000 ppm.
6. Polybrominated diphenyl ethers (PBDEs): less than 1000 ppm.
7. Di(2-ethylhexyl) phthalate (DEHP): less than 1000 ppm.
8. Butyl benzyl phthalate (BBP): less than 1000 ppm.
9. Dibutyl phthalate (DBP): less than 1000 ppm.
10. Diisobutyl phthalate (DIBP): less than 1000 ppm.
What instruments are typically used for RoHS testing?
The commonly used analytical instrument for RoHS 1.0 is X-ray fluorescence spectroscopy (XRF). XRF analyzers are available in standalone, benchtop, and handheld configurations. Typically, a handheld XRF analyzer is employed first for portable on-site testing, with a focus on components of the product that pose a higher risk of containing restricted substances.
With the introduction of RoHS 2.0, four phthalate esters have been added to the RoHS Directive, necessitating additional testing to determine the levels of these compounds, which are extracted using solvents. The solvent extracts are then analyzed for the presence of phthalates by gas chromatography–mass spectrometry (GC/MS) or gas chromatography with flame ionization detection (GC/FID). Other elements and polybrominated diphenyl ethers/alkylated elastomers are analyzed using comparative methods and GC/MS, respectively.
Do the ten RoHS items require two instruments for testing?
The ten items specified in RoHS require two instruments for testing.
For the ten‑item RoHS testing, two instruments are required to complete the analysis; a single instrument cannot achieve this. Even if one instrument is used to measure heavy metal content, the other must be employed to analyze organic compounds.
X-ray fluorescence spectrometers are used to detect RoHS 1.0, while chromatographs, pyrolyzers, or hyphenated techniques such as GC–MS are employed to analyze the four phthalates specified in RoHS 2.0. At present, no single instrument can independently perform all the tests required for RoHS 2.0.
Can ROHS testing instruments detect metallic elements?
ROHS testing instruments are specialized devices used to detect the presence of hazardous substances in electronic components, household appliances, toys, and other products. These harmful substances can pose long-term risks to both human health and the environment, making the use of ROHS testing equipment of paramount importance.
Regarding whether ROHS testing instruments can detect metallic elements, the answer is yes. This is because ROHS testing covers not only hazardous substances but also the analysis of metallic constituents in compliant products. These metals include lead, cadmium, mercury, and others, which are widely used during the manufacturing process. Although these elements are essential, their excessive use poses significant risks to human health and the environment. Consequently, the advent of ROHS testing instruments has greatly facilitated the detection of metallic elements.
