[DePu Instruments] – A manufacturer specializing in testing instruments for RoHS compliance, heavy metals, alloy analysis, halogens, and more!
Product Inquiry:19926823034(WeChat ID is the same)
- All
- Product Management
- News and Information
- Introduction Content
- Corporate outlets
- Frequently Asked Questions
- Corporate Video
- Corporate Portfolio
RoHS 2.0 instrument RoHS 1.0 instrument
Alloy analyzerCoating Analyzer
Do metal ROHS detectors emit radiation?
发布时间: 2022-09-14 10:39
Metal ROHS detector Ionizing radiation is generated during use. Therefore, during specific testing procedures, you must never… ROHS detector Pointing at people, testing instruments in mid-air, and conducting tests with samples in hand—so, do metal RoHS detectors emit radiation?
The answer is yes: metal ROHS testing instruments primarily emit X‑ray radiation, which can be monitored using a radiation safety detector. The safe distance depends on the radiation intensity. All XRF instruments operate by using X‑rays to excite the sample, so they must be equipped with protective shielding to prevent X‑ray leakage during operation. In China, there are no mandatory regulatory standards for radiation safety in XRF instruments; as a result, many domestic devices historically did not prioritize this issue, leading to some X‑ray leakage during use. We recommend having the equipment tested by an accredited quality‑inspection authority. If radiation levels exceed acceptable limits, consider purchasing protective gear or switching to imported instruments that come with radiation‑safety certification. However, modern ROHS‑compliant instruments typically produce very low radiation levels that do not pose a health risk—this has already been verified through factory testing. If you need to open the instrument’s cover for inspection, maintain a distance of approximately 10 meters from the device. Additionally, take into account the pressure within your ROHS system. During testing, it is advisable to wear radiation‑protective clothing to ensure safety.
Metal ROHS detectors measure the characteristic X-ray energies of different elements, which vary accordingly; therefore, qualitative analysis is performed first, followed by quantitative analysis. The specific calculation formula is as follows: C = f(k1I1, k2I2, k3I3...), where KN (n = 1, 2, 3...) denotes the undetermined coefficient for the nth element, and IN (n = 1, 2, 3...) represents the intensity of the characteristic X-rays emitted by the nth element. Typically, modern metal ROHS environmental‑compliance testing instruments come with radiation exemption certificates, ensuring they are safe for operators. It is recommended to learn more about these devices.
The above is an introduction to whether metal ROHS detectors emit radiation. If you would like to learn more about… Metal RoHS detector information , you can continue to visit our website or contact us directly!
Latest News
Recommended Products
Frequently Asked Questions
What is RoHS?
RoHS is a mandatory standard established by EU legislation, officially known as the “Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment.” The standard entered into force on July 1, 2006, and primarily aims to regulate the materials and manufacturing processes of electrical and electronic products, thereby promoting human health and environmental protection.
The purpose of this standard is to eliminate six substances—lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers (note: the correct Chinese term for PBDE is “polybrominated diphenyl ethers”; “polybrominated biphenyl ethers” is an incorrect designation)—and specifically stipulates that the cadmium content must not exceed 0.01%.
The latest RoHS Directive has added four new phthalate‑ester testing items: DEHP—di(2‑ethylhexyl) phthalate; BBP—butyl benzyl phthalate; DBP—dibutyl phthalate; and DIBP—diisobutyl phthalate.
What are the limit values for the ten hazardous substances under RoHS?
1. Cadmium: less than 100 ppm.
2. Lead: less than 1000 ppm.
3. Mercury: less than 1000 ppm.
4. Hexavalent chromium: less than 1000 ppm.
5. Polybrominated biphenyls (PBB): less than 1000 ppm.
6. Polybrominated diphenyl ethers (PBDEs): less than 1000 ppm.
7. Di(2-ethylhexyl) phthalate (DEHP): less than 1000 ppm.
8. Butyl benzyl phthalate (BBP): less than 1000 ppm.
9. Dibutyl phthalate (DBP): less than 1000 ppm.
10. Diisobutyl phthalate (DIBP): less than 1000 ppm.
What instruments are typically used for RoHS testing?
The commonly used analytical instrument for RoHS 1.0 is X-ray fluorescence spectroscopy (XRF). XRF analyzers are available in standalone, benchtop, and handheld configurations. Typically, a handheld XRF analyzer is employed first for portable on-site testing, with a focus on components of the product that pose a higher risk of containing restricted substances.
With the introduction of RoHS 2.0, four phthalate esters have been added to the RoHS Directive, necessitating additional testing to determine the levels of these compounds, which are extracted using solvents. The solvent extracts are then analyzed for the presence of phthalates by gas chromatography–mass spectrometry (GC/MS) or gas chromatography with flame ionization detection (GC/FID). Other elements and polybrominated diphenyl ethers/alkylated elastomers are analyzed using comparative methods and GC/MS, respectively.
Do the ten RoHS items require two instruments for testing?
The ten items specified in RoHS require two instruments for testing.
For the ten‑item RoHS testing, two instruments are required to complete the analysis; a single instrument cannot achieve this. Even if one instrument is used to measure heavy metal content, the other must be employed to analyze organic compounds.
X-ray fluorescence spectrometers are used to detect RoHS 1.0, while chromatographs, pyrolyzers, or hyphenated techniques such as GC–MS are employed to analyze the four phthalates specified in RoHS 2.0. At present, no single instrument can independently perform all the tests required for RoHS 2.0.
Can ROHS testing instruments detect metallic elements?
ROHS testing instruments are specialized devices used to detect the presence of hazardous substances in electronic components, household appliances, toys, and other products. These harmful substances can pose long-term risks to both human health and the environment, making the use of ROHS testing equipment of paramount importance.
Regarding whether ROHS testing instruments can detect metallic elements, the answer is yes. This is because ROHS testing covers not only hazardous substances but also the analysis of metallic constituents in compliant products. These metals include lead, cadmium, mercury, and others, which are widely used during the manufacturing process. Although these elements are essential, their excessive use poses significant risks to human health and the environment. Consequently, the advent of ROHS testing instruments has greatly facilitated the detection of metallic elements.
