[DePu Instruments] – A manufacturer specializing in testing instruments for RoHS compliance, heavy metals, alloy analysis, halogens, and more!
Product Inquiry:19926823034(WeChat ID is the same)
- All
- Product Management
- News and Information
- Introduction Content
- Corporate outlets
- Frequently Asked Questions
- Corporate Video
- Corporate Portfolio
RoHS 2.0 instrument RoHS 1.0 instrument
Alloy analyzerCoating Analyzer
What is the optimal operating environment for an ROHS detector?
发布时间: 2022-08-30 10:17
RoHS tester It is a testing instrument compliant with the EU’s RoHS standards. Simply put, it is used to detect six hazardous substances: lead (Pb), cadmium (Cd), mercury (Hg), hexavalent chromium (Cr6+), polybrominated diphenyl ethers (PBDEs), and polybrominated biphenyls (PBBs). As a precision analytical device, the RoHS tester has specific environmental requirements during operation. So, what is the optimal operating environment for a RoHS tester? Let’s take a brief look below.
1. There must be no strong magnetic field interference in the surrounding area.
The ROHS analyzer must be installed in an environment free from electromagnetic interference caused by motors, vibration, electromagnetic fields, high-voltage equipment, or high-frequency welding devices; otherwise, such interference may distort the instrument’s spectral profile or prevent it from functioning properly.
2. Understand the effects of ambient temperature and humidity.
The room temperature should be maintained between 20 and 25°C. Both excessively high and low temperatures can impair the equipment’s normal operation, so air conditioning is required. The relative humidity in the air should be kept below 70%. If the humidity exceeds this level, arcing and discharge may occur within the internal high-voltage components.
3. When the ROHS tester’s measurement window is exposed, ensure that no foreign objects enter the window.
4. Below the testing window of the ROHS detector are the imported detector window and the X-ray tube window, both made of ultra-thin beryllium metal. To protect them from damage, the following requirements apply:
(1) During operation, care should be taken to protect the window and prevent contaminants from entering. If any foreign matter does enter, it should be carefully removed or gently blown away with an ear bulb.
(2) Samples should be handled with care. Before placing the sample, use an ear bulb to blow clean the test window.
5. The maintenance and cleaning of the ROHS detector can also affect the measurement results.
After use, wipe the surface with a slightly damp cloth. Do not use alkaline or acidic detergents; instead, use a neutral detergent. During cleaning, be careful to prevent foreign objects from falling into the test window. Keep the test window clean, and avoid touching it with hard objects to prevent damage to the detector window and the X-ray tube window.
The above is an introduction to the optimal operating environment for RoHS detectors. If you have any needs regarding RoHS detectors, please contact us. If you would like to learn more about… ROHS detector information Yes, you may continue browsing our website!
Latest News
Recommended Products
Frequently Asked Questions
What is RoHS?
RoHS is a mandatory standard established by EU legislation, officially known as the “Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment.” The standard entered into force on July 1, 2006, and primarily aims to regulate the materials and manufacturing processes of electrical and electronic products, thereby promoting human health and environmental protection.
The purpose of this standard is to eliminate six substances—lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers (note: the correct Chinese term for PBDE is “polybrominated diphenyl ethers”; “polybrominated biphenyl ethers” is an incorrect designation)—and specifically stipulates that the cadmium content must not exceed 0.01%.
The latest RoHS Directive has added four new phthalate‑ester testing items: DEHP—di(2‑ethylhexyl) phthalate; BBP—butyl benzyl phthalate; DBP—dibutyl phthalate; and DIBP—diisobutyl phthalate.
What are the limit values for the ten hazardous substances under RoHS?
1. Cadmium: less than 100 ppm.
2. Lead: less than 1000 ppm.
3. Mercury: less than 1000 ppm.
4. Hexavalent chromium: less than 1000 ppm.
5. Polybrominated biphenyls (PBB): less than 1000 ppm.
6. Polybrominated diphenyl ethers (PBDEs): less than 1000 ppm.
7. Di(2-ethylhexyl) phthalate (DEHP): less than 1000 ppm.
8. Butyl benzyl phthalate (BBP): less than 1000 ppm.
9. Dibutyl phthalate (DBP): less than 1000 ppm.
10. Diisobutyl phthalate (DIBP): less than 1000 ppm.
What instruments are typically used for RoHS testing?
The commonly used analytical instrument for RoHS 1.0 is X-ray fluorescence spectroscopy (XRF). XRF analyzers are available in standalone, benchtop, and handheld configurations. Typically, a handheld XRF analyzer is employed first for portable on-site testing, with a focus on components of the product that pose a higher risk of containing restricted substances.
With the introduction of RoHS 2.0, four phthalate esters have been added to the RoHS Directive, necessitating additional testing to determine the levels of these compounds, which are extracted using solvents. The solvent extracts are then analyzed for the presence of phthalates by gas chromatography–mass spectrometry (GC/MS) or gas chromatography with flame ionization detection (GC/FID). Other elements and polybrominated diphenyl ethers/alkylated elastomers are analyzed using comparative methods and GC/MS, respectively.
Do the ten RoHS items require two instruments for testing?
The ten items specified in RoHS require two instruments for testing.
For the ten‑item RoHS testing, two instruments are required to complete the analysis; a single instrument cannot achieve this. Even if one instrument is used to measure heavy metal content, the other must be employed to analyze organic compounds.
X-ray fluorescence spectrometers are used to detect RoHS 1.0, while chromatographs, pyrolyzers, or hyphenated techniques such as GC–MS are employed to analyze the four phthalates specified in RoHS 2.0. At present, no single instrument can independently perform all the tests required for RoHS 2.0.
Can ROHS testing instruments detect metallic elements?
ROHS testing instruments are specialized devices used to detect the presence of hazardous substances in electronic components, household appliances, toys, and other products. These harmful substances can pose long-term risks to both human health and the environment, making the use of ROHS testing equipment of paramount importance.
Regarding whether ROHS testing instruments can detect metallic elements, the answer is yes. This is because ROHS testing covers not only hazardous substances but also the analysis of metallic constituents in compliant products. These metals include lead, cadmium, mercury, and others, which are widely used during the manufacturing process. Although these elements are essential, their excessive use poses significant risks to human health and the environment. Consequently, the advent of ROHS testing instruments has greatly facilitated the detection of metallic elements.
