[DePu Instruments] – A manufacturer specializing in testing instruments for RoHS compliance, heavy metals, alloy analysis, halogens, and more!
Product Inquiry:19926823034(WeChat ID is the same)
- All
- Product Management
- News and Information
- Introduction Content
- Corporate outlets
- Frequently Asked Questions
- Corporate Video
- Corporate Portfolio
RoHS 2.0 instrument RoHS 1.0 instrument
Alloy analyzerCoating Analyzer
The functions of each component of a gas chromatograph!
发布时间: 2022-07-29 10:23
In the field of analytical chemistry, chromatography is a modern separation‑and‑analysis technique. Gas chromatography can be used to separate and analyze complex multicomponent mixtures. It is an instrument that achieves separation based on the differing migration rates of molecules. A gas chromatograph consists of a carrier‑gas system, an injection system, a separation system, a detection system, a signal‑recording or computer‑data‑processing system, and a temperature‑control system; thus, Gas chromatograph What is the role of each component? Take a look below!
1. Carrier Gas System: In a gas chromatograph, the gas delivery system is a closed pipeline network through which the carrier gas flows continuously. The entire carrier gas system must ensure that the carrier gas is of high purity, the system is tightly sealed, the flow rate is stable, and flow measurement is accurate.
2. Sample Injection System: Sample injection is the process of rapidly and quantitatively introducing a gaseous or liquid sample into the upper end of the chromatographic column.
3. Separation System: The chromatographic column is the heart of the separation system, responsible for resolving a multi-component sample into its individual components. Chromatographic columns are broadly classified into two main types: packed columns and capillary columns.
4. Detection System: The detector converts the sample components separated by the chromatographic column into electrical signals based on their characteristics and concentrations. After amplification, these signals are recorded by a recorder to generate a chromatogram.
5. Signal Recording or Computer Data Processing Systems: In recent years, gas chromatographs have predominantly employed chromatographic data processors. These processors can print and record chromatograms and, after processing, output results such as retention times and the mass fractions of the analytes—all on a single recording sheet.
6. Temperature Control System: Used to regulate and measure the temperatures of the chromatographic column, detector, and vaporization chamber, it is an essential component of a gas chromatograph.
A gas chromatograph is a separation technique based on processes such as adsorption, partitioning, ion exchange, affinity, and molecular size. It exploits subtle differences among the components of a two-phase system—namely, their adsorption capacities, distribution coefficients, ion-exchange capacities, affinities, or molecular sizes. By facilitating continuous mass transfer between the two phases, the system can separate the various components. Chromatographic separation is the combined manifestation of thermodynamic and kinetic processes within the chromatographic system. The thermodynamic process refers to phenomena related to the distribution coefficients of the individual components in the system, while the kinetic process involves the diffusion and mass transfer of components between the two phases.
The above is an overview of the functions of each component of a gas chromatograph. If you have any requirements for a gas chromatograph, please contact us. Gas chromatograph manufacturer - DePu, we will get back to you as soon as possible!
Latest News
Recommended Products
Frequently Asked Questions
What is RoHS?
RoHS is a mandatory standard established by EU legislation, officially known as the “Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment.” The standard entered into force on July 1, 2006, and primarily aims to regulate the materials and manufacturing processes of electrical and electronic products, thereby promoting human health and environmental protection.
The purpose of this standard is to eliminate six substances—lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers (note: the correct Chinese term for PBDE is “polybrominated diphenyl ethers”; “polybrominated biphenyl ethers” is an incorrect designation)—and specifically stipulates that the cadmium content must not exceed 0.01%.
The latest RoHS Directive has added four new phthalate‑ester testing items: DEHP—di(2‑ethylhexyl) phthalate; BBP—butyl benzyl phthalate; DBP—dibutyl phthalate; and DIBP—diisobutyl phthalate.
What are the limit values for the ten hazardous substances under RoHS?
1. Cadmium: less than 100 ppm.
2. Lead: less than 1000 ppm.
3. Mercury: less than 1000 ppm.
4. Hexavalent chromium: less than 1000 ppm.
5. Polybrominated biphenyls (PBB): less than 1000 ppm.
6. Polybrominated diphenyl ethers (PBDEs): less than 1000 ppm.
7. Di(2-ethylhexyl) phthalate (DEHP): less than 1000 ppm.
8. Butyl benzyl phthalate (BBP): less than 1000 ppm.
9. Dibutyl phthalate (DBP): less than 1000 ppm.
10. Diisobutyl phthalate (DIBP): less than 1000 ppm.
What instruments are typically used for RoHS testing?
The commonly used analytical instrument for RoHS 1.0 is X-ray fluorescence spectroscopy (XRF). XRF analyzers are available in standalone, benchtop, and handheld configurations. Typically, a handheld XRF analyzer is employed first for portable on-site testing, with a focus on components of the product that pose a higher risk of containing restricted substances.
With the introduction of RoHS 2.0, four phthalate esters have been added to the RoHS Directive, necessitating additional testing to determine the levels of these compounds, which are extracted using solvents. The solvent extracts are then analyzed for the presence of phthalates by gas chromatography–mass spectrometry (GC/MS) or gas chromatography with flame ionization detection (GC/FID). Other elements and polybrominated diphenyl ethers/alkylated elastomers are analyzed using comparative methods and GC/MS, respectively.
Do the ten RoHS items require two instruments for testing?
The ten items specified in RoHS require two instruments for testing.
For the ten‑item RoHS testing, two instruments are required to complete the analysis; a single instrument cannot achieve this. Even if one instrument is used to measure heavy metal content, the other must be employed to analyze organic compounds.
X-ray fluorescence spectrometers are used to detect RoHS 1.0, while chromatographs, pyrolyzers, or hyphenated techniques such as GC–MS are employed to analyze the four phthalates specified in RoHS 2.0. At present, no single instrument can independently perform all the tests required for RoHS 2.0.
Can ROHS testing instruments detect metallic elements?
ROHS testing instruments are specialized devices used to detect the presence of hazardous substances in electronic components, household appliances, toys, and other products. These harmful substances can pose long-term risks to both human health and the environment, making the use of ROHS testing equipment of paramount importance.
Regarding whether ROHS testing instruments can detect metallic elements, the answer is yes. This is because ROHS testing covers not only hazardous substances but also the analysis of metallic constituents in compliant products. These metals include lead, cadmium, mercury, and others, which are widely used during the manufacturing process. Although these elements are essential, their excessive use poses significant risks to human health and the environment. Consequently, the advent of ROHS testing instruments has greatly facilitated the detection of metallic elements.
