[DePu Instruments] – A manufacturer specializing in testing instruments for RoHS compliance, heavy metals, alloy analysis, halogens, and more!
Product Inquiry:19926823034(WeChat ID is the same)
- All
- Product Management
- News and Information
- Introduction Content
- Corporate outlets
- Frequently Asked Questions
- Corporate Video
- Corporate Portfolio
RoHS 2.0 instrument RoHS 1.0 instrument
Alloy analyzerCoating Analyzer
Will using an ROHS‑compliant fluorescence spectrometer affect human health?
发布时间: 2022-06-29 10:37
Many people are using it. RoHS fluorescence spectrometer At times, one may worry whether using an ROHS‑compliant fluorescence spectrometer has any adverse effects and whether it could harm human health.
Let us first understand X-rays. X-rays are electromagnetic radiation with wavelengths between those of ultraviolet light and gamma rays. They are characterized by extremely short wavelengths and high frequencies, and they consist of streams of uncharged particles. X-rays are emitted during nuclear energy-level transitions and are a form of electromagnetic wave with wavelengths less than 0.2 angstroms. Gamma rays possess strong penetrating power and are used in industrial nondestructive testing and automated production-line control. They are highly destructive to cells and are employed in medicine for the treatment of tumors. As such, X-rays pose relatively minor radiation hazards, whereas gamma rays present greater risks. If gamma rays are likened to hornets, then X-ray fluorescence is comparable to honeybees—thus, their potential harm to the human body is comparatively limited.
Under conditions of chronic, low-dose, continuous X-ray exposure, chronic radiation injury may occur, primarily due to inadequate protective measures among X-ray professionals who are routinely exposed to excessive doses over long periods. ROHS‑compliant X‑ray fluorescence spectrometers should already be equipped with radiation shielding, such as lead plates and lead glass. Additionally, the X-ray tube housing should feature shutters or protective covers, and the primary beam exit should be sealed. For any leakage, the measured intensity will decrease and the wavelength will increase relative to the irradiated surface, resulting in comparatively minor harm to the human body. If concerns remain, lead shields or other protective barriers should be provided near the equipment; taking shelter behind them is a safer precaution.
Use ROHS (X-ray) machine . In cases of chronic, low‑dose, continuous exposure, chronic radiation injury may occur, primarily due to X‑ray professionals failing to observe adequate protective measures and receiving excessive doses over extended periods. . Ionizing radiation can cause both acute and chronic systemic radiation injuries, as well as localized skin damage. One year after the discovery of X‑rays, Grube, a manufacturer of X‑ray tubes, developed atopic dermatitis on his hands. In 1899, Stevens was the first to report skin damage caused by X‑rays. Human experience has demonstrated that the application of X‑rays can confer substantial benefits—such as in radiographic diagnosis and radiotherapy—but if proper protective measures are not observed or if they are used improperly, such applications may also result in harm, including individual injury or an increased incidence of cancer within populations. Therefore, appropriate protective measures should be taken during work, including the use of radiation‑shielding workwear.
Therefore, during work, it is important to take protective measures: wear radiation‑protective workwear, operate equipment properly and appropriately, avoid prolonged exposure, and consume more radiation‑protective foods to safeguard your health.
Latest News
Recommended Products
Frequently Asked Questions
What is RoHS?
RoHS is a mandatory standard established by EU legislation, officially known as the “Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment.” The standard entered into force on July 1, 2006, and primarily aims to regulate the materials and manufacturing processes of electrical and electronic products, thereby promoting human health and environmental protection.
The purpose of this standard is to eliminate six substances—lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers (note: the correct Chinese term for PBDE is “polybrominated diphenyl ethers”; “polybrominated biphenyl ethers” is an incorrect designation)—and specifically stipulates that the cadmium content must not exceed 0.01%.
The latest RoHS Directive has added four new phthalate‑ester testing items: DEHP—di(2‑ethylhexyl) phthalate; BBP—butyl benzyl phthalate; DBP—dibutyl phthalate; and DIBP—diisobutyl phthalate.
What are the limit values for the ten hazardous substances under RoHS?
1. Cadmium: less than 100 ppm.
2. Lead: less than 1000 ppm.
3. Mercury: less than 1000 ppm.
4. Hexavalent chromium: less than 1000 ppm.
5. Polybrominated biphenyls (PBB): less than 1000 ppm.
6. Polybrominated diphenyl ethers (PBDEs): less than 1000 ppm.
7. Di(2-ethylhexyl) phthalate (DEHP): less than 1000 ppm.
8. Butyl benzyl phthalate (BBP): less than 1000 ppm.
9. Dibutyl phthalate (DBP): less than 1000 ppm.
10. Diisobutyl phthalate (DIBP): less than 1000 ppm.
What instruments are typically used for RoHS testing?
The commonly used analytical instrument for RoHS 1.0 is X-ray fluorescence spectroscopy (XRF). XRF analyzers are available in standalone, benchtop, and handheld configurations. Typically, a handheld XRF analyzer is employed first for portable on-site testing, with a focus on components of the product that pose a higher risk of containing restricted substances.
With the introduction of RoHS 2.0, four phthalate esters have been added to the RoHS Directive, necessitating additional testing to determine the levels of these compounds, which are extracted using solvents. The solvent extracts are then analyzed for the presence of phthalates by gas chromatography–mass spectrometry (GC/MS) or gas chromatography with flame ionization detection (GC/FID). Other elements and polybrominated diphenyl ethers/alkylated elastomers are analyzed using comparative methods and GC/MS, respectively.
Do the ten RoHS items require two instruments for testing?
The ten items specified in RoHS require two instruments for testing.
For the ten‑item RoHS testing, two instruments are required to complete the analysis; a single instrument cannot achieve this. Even if one instrument is used to measure heavy metal content, the other must be employed to analyze organic compounds.
X-ray fluorescence spectrometers are used to detect RoHS 1.0, while chromatographs, pyrolyzers, or hyphenated techniques such as GC–MS are employed to analyze the four phthalates specified in RoHS 2.0. At present, no single instrument can independently perform all the tests required for RoHS 2.0.
Can ROHS testing instruments detect metallic elements?
ROHS testing instruments are specialized devices used to detect the presence of hazardous substances in electronic components, household appliances, toys, and other products. These harmful substances can pose long-term risks to both human health and the environment, making the use of ROHS testing equipment of paramount importance.
Regarding whether ROHS testing instruments can detect metallic elements, the answer is yes. This is because ROHS testing covers not only hazardous substances but also the analysis of metallic constituents in compliant products. These metals include lead, cadmium, mercury, and others, which are widely used during the manufacturing process. Although these elements are essential, their excessive use poses significant risks to human health and the environment. Consequently, the advent of ROHS testing instruments has greatly facilitated the detection of metallic elements.
