[DePu Instruments] – A manufacturer specializing in testing instruments for RoHS compliance, heavy metals, alloy analysis, halogens, and more!
Product Inquiry:19926823034(WeChat ID is the same)
- All
- Product Management
- News and Information
- Introduction Content
- Corporate outlets
- Frequently Asked Questions
- Corporate Video
- Corporate Portfolio
RoHS 2.0 instrument RoHS 1.0 instrument
Alloy analyzerCoating Analyzer
How do you use a halogen detector?
分类: News Center
发布时间: 2022-06-28 10:26
Halogen detector It is a new type of instrument on the market that can rapidly determine the moisture content of samples. This product is easy and quick to operate, and is widely used for moisture measurement in industries such as food, pharmaceuticals, chemicals, and powdered chemical products. So how do you use a halogen moisture analyzer? Here’s a brief explanation!
1. How do you use a halogen detector?
1. First, press the calibration button and place the weight on the halogen detector to initiate automatic calibration.
2. Sampling: Press the test button to start operation.
3. The halogen detector is heating up, and the instrument displays the water loss value.
4. After the measurement is completed, the instrument displays the final moisture value and records the data.
5. Allow the halogen detector to cool down, then proceed to measure the next sample.
II. What should be kept in mind when using a halogen detector?
1. Sufficient clearance should be maintained around the halogen detector to prevent heat buildup and overheating. As the heating elements surrounding the moisture analyzer can become hot, do not place flammable materials near the instrument.
2. After testing, both the sample itself and the heating device and its container will remain very hot; therefore, exercise caution when removing the sample.
3. During the heating and drying process, the temperature of the annular heating element can reach 400°C. Therefore, do not open or touch the heating unit. If you must open it, disconnect the power supply and wait for it to cool completely.
4. Exercise particular caution with flammable or combustible materials, substrates containing solvents, and substrates that release flammable or explosive gases when heated, as these samples may pose health hazards or damage equipment.
A halogen detector is a new type of rapid moisture analyzer. Testing instrument Its annular halogen heater ensures uniform heating of the sample during high‑temperature testing, minimizing surface damage and enabling rapid drying. During the drying process, the halogen moisture analyzer continuously measures and instantly displays the percentage of moisture lost, signaling when drying is complete. Subsequently, the final moisture content value is locked and displayed. Compared with the international oven‑drying method, this instrument delivers highly consistent results, serves as a reliable alternative, and achieves far greater analytical efficiency. Typically, a sample can be analyzed in just a few minutes.
Latest News
Recommended Products
Frequently Asked Questions
What is RoHS?
RoHS is a mandatory standard established by EU legislation, officially known as the “Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment.” The standard entered into force on July 1, 2006, and primarily aims to regulate the materials and manufacturing processes of electrical and electronic products, thereby promoting human health and environmental protection.
The purpose of this standard is to eliminate six substances—lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers (note: the correct Chinese term for PBDE is “polybrominated diphenyl ethers”; “polybrominated biphenyl ethers” is an incorrect designation)—and specifically stipulates that the cadmium content must not exceed 0.01%.
The latest RoHS Directive has added four new phthalate‑ester testing items: DEHP—di(2‑ethylhexyl) phthalate; BBP—butyl benzyl phthalate; DBP—dibutyl phthalate; and DIBP—diisobutyl phthalate.
What are the limit values for the ten hazardous substances under RoHS?
1. Cadmium: less than 100 ppm.
2. Lead: less than 1000 ppm.
3. Mercury: less than 1000 ppm.
4. Hexavalent chromium: less than 1000 ppm.
5. Polybrominated biphenyls (PBB): less than 1000 ppm.
6. Polybrominated diphenyl ethers (PBDEs): less than 1000 ppm.
7. Di(2-ethylhexyl) phthalate (DEHP): less than 1000 ppm.
8. Butyl benzyl phthalate (BBP): less than 1000 ppm.
9. Dibutyl phthalate (DBP): less than 1000 ppm.
10. Diisobutyl phthalate (DIBP): less than 1000 ppm.
What instruments are typically used for RoHS testing?
The commonly used analytical instrument for RoHS 1.0 is X-ray fluorescence spectroscopy (XRF). XRF analyzers are available in standalone, benchtop, and handheld configurations. Typically, a handheld XRF analyzer is employed first for portable on-site testing, with a focus on components of the product that pose a higher risk of containing restricted substances.
With the introduction of RoHS 2.0, four phthalate esters have been added to the RoHS Directive, necessitating additional testing to determine the levels of these compounds, which are extracted using solvents. The solvent extracts are then analyzed for the presence of phthalates by gas chromatography–mass spectrometry (GC/MS) or gas chromatography with flame ionization detection (GC/FID). Other elements and polybrominated diphenyl ethers/alkylated elastomers are analyzed using comparative methods and GC/MS, respectively.
Do the ten RoHS items require two instruments for testing?
The ten items specified in RoHS require two instruments for testing.
For the ten‑item RoHS testing, two instruments are required to complete the analysis; a single instrument cannot achieve this. Even if one instrument is used to measure heavy metal content, the other must be employed to analyze organic compounds.
X-ray fluorescence spectrometers are used to detect RoHS 1.0, while chromatographs, pyrolyzers, or hyphenated techniques such as GC–MS are employed to analyze the four phthalates specified in RoHS 2.0. At present, no single instrument can independently perform all the tests required for RoHS 2.0.
Can ROHS testing instruments detect metallic elements?
ROHS testing instruments are specialized devices used to detect the presence of hazardous substances in electronic components, household appliances, toys, and other products. These harmful substances can pose long-term risks to both human health and the environment, making the use of ROHS testing equipment of paramount importance.
Regarding whether ROHS testing instruments can detect metallic elements, the answer is yes. This is because ROHS testing covers not only hazardous substances but also the analysis of metallic constituents in compliant products. These metals include lead, cadmium, mercury, and others, which are widely used during the manufacturing process. Although these elements are essential, their excessive use poses significant risks to human health and the environment. Consequently, the advent of ROHS testing instruments has greatly facilitated the detection of metallic elements.
