[DePu Instruments] – A manufacturer specializing in testing instruments for RoHS compliance, heavy metals, alloy analysis, halogens, and more!
Product Inquiry:19926823034(WeChat ID is the same)
- All
- Product Management
- News and Information
- Introduction Content
- Corporate outlets
- Frequently Asked Questions
- Corporate Video
- Corporate Portfolio
RoHS 2.0 instrument RoHS 1.0 instrument
Alloy analyzerCoating Analyzer
The working principle and applications of ion chromatography!
发布时间: 2022-06-22 15:24
I. Definition of Ion Chromatography
An ion chromatograph is High-performance liquid chromatograph A type of chromatography, it is also referred to as high-performance ion chromatography (HPIC) or modern ion chromatography. Its key distinction from traditional ion-exchange column chromatography lies in the resin’s high crosslinking degree and relatively low exchange capacity, coupled with very small injection volumes. Eluent is delivered by a piston pump, and the effluent is typically subjected to online, automated, continuous conductivity detection.

II. Working Principle of the Ion Chromatograph
The principle of separation is based on the reversible exchange between dissociable ions on the ion-exchange resin and solute ions in the mobile phase that carry the same charge, as well as on differences in the analyte’s affinity for the exchange agent. It is suitable for the separation of hydrophilic anions and cations.
For example, in the separation of several anions, after the sample solution is injected, the anions first undergo ion exchange directly with the ion-exchange sites on the analytical column and are thus retained. When NaOH is used as the eluent to analyze F⁻, Cl⁻, and SO₄²⁻ in the sample, the anions retained on the column are displaced by the OH⁻ ions in the eluent and subsequently eluted from the column. Analyte ions with weaker affinity for the resin are eluted before those with stronger affinity; this constitutes the ion-chromatographic separation process. The effluent then passes through a chemical suppressor, which minimizes the background conductivity originating from the eluent. As a result, when the analytes exit and enter the conductivity cell, they generate a larger, accurately measurable conductivity signal.
III. Applications of Ion Chromatography Instruments
Ion chromatography is primarily used for the analysis of environmental samples, including anions and cations in surface water, drinking water, rainwater, domestic sewage, industrial wastewater, acid deposition, and atmospheric particulate matter, as well as for the determination of trace impurities in water and reagents relevant to the microelectronics industry.
In addition, it is widely used in fields such as food processing, sanitation, petrochemicals, water treatment, and geology.
Common ions that are frequently analyzed include:
Anions: F⁻, Cl⁻, Br⁻, NO₂⁻, PO₄³⁻, NO₃⁻, SO₄²⁻, formate, acetate, oxalate, and others.
Cations: Li+, Na+, NH4+, K+, Ca2+, Mg2+, Cu2+, Zn2+, Fe2+, Fe3+, etc.
Ion chromatography excels at the separation and quantification of common anions; a single injection yields results for seven major ions in approximately 20 minutes—performance that other analytical techniques cannot match. However, when it comes to cation analysis, ion chromatography does not demonstrate any clear advantages over atomic absorption spectroscopy (AAS) or inductively coupled plasma (ICP) methods.
Latest News
Recommended Products
Frequently Asked Questions
What is RoHS?
RoHS is a mandatory standard established by EU legislation, officially known as the “Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment.” The standard entered into force on July 1, 2006, and primarily aims to regulate the materials and manufacturing processes of electrical and electronic products, thereby promoting human health and environmental protection.
The purpose of this standard is to eliminate six substances—lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers (note: the correct Chinese term for PBDE is “polybrominated diphenyl ethers”; “polybrominated biphenyl ethers” is an incorrect designation)—and specifically stipulates that the cadmium content must not exceed 0.01%.
The latest RoHS Directive has added four new phthalate‑ester testing items: DEHP—di(2‑ethylhexyl) phthalate; BBP—butyl benzyl phthalate; DBP—dibutyl phthalate; and DIBP—diisobutyl phthalate.
What are the limit values for the ten hazardous substances under RoHS?
1. Cadmium: less than 100 ppm.
2. Lead: less than 1000 ppm.
3. Mercury: less than 1000 ppm.
4. Hexavalent chromium: less than 1000 ppm.
5. Polybrominated biphenyls (PBB): less than 1000 ppm.
6. Polybrominated diphenyl ethers (PBDEs): less than 1000 ppm.
7. Di(2-ethylhexyl) phthalate (DEHP): less than 1000 ppm.
8. Butyl benzyl phthalate (BBP): less than 1000 ppm.
9. Dibutyl phthalate (DBP): less than 1000 ppm.
10. Diisobutyl phthalate (DIBP): less than 1000 ppm.
What instruments are typically used for RoHS testing?
The commonly used analytical instrument for RoHS 1.0 is X-ray fluorescence spectroscopy (XRF). XRF analyzers are available in standalone, benchtop, and handheld configurations. Typically, a handheld XRF analyzer is employed first for portable on-site testing, with a focus on components of the product that pose a higher risk of containing restricted substances.
With the introduction of RoHS 2.0, four phthalate esters have been added to the RoHS Directive, necessitating additional testing to determine the levels of these compounds, which are extracted using solvents. The solvent extracts are then analyzed for the presence of phthalates by gas chromatography–mass spectrometry (GC/MS) or gas chromatography with flame ionization detection (GC/FID). Other elements and polybrominated diphenyl ethers/alkylated elastomers are analyzed using comparative methods and GC/MS, respectively.
Do the ten RoHS items require two instruments for testing?
The ten items specified in RoHS require two instruments for testing.
For the ten‑item RoHS testing, two instruments are required to complete the analysis; a single instrument cannot achieve this. Even if one instrument is used to measure heavy metal content, the other must be employed to analyze organic compounds.
X-ray fluorescence spectrometers are used to detect RoHS 1.0, while chromatographs, pyrolyzers, or hyphenated techniques such as GC–MS are employed to analyze the four phthalates specified in RoHS 2.0. At present, no single instrument can independently perform all the tests required for RoHS 2.0.
Can ROHS testing instruments detect metallic elements?
ROHS testing instruments are specialized devices used to detect the presence of hazardous substances in electronic components, household appliances, toys, and other products. These harmful substances can pose long-term risks to both human health and the environment, making the use of ROHS testing equipment of paramount importance.
Regarding whether ROHS testing instruments can detect metallic elements, the answer is yes. This is because ROHS testing covers not only hazardous substances but also the analysis of metallic constituents in compliant products. These metals include lead, cadmium, mercury, and others, which are widely used during the manufacturing process. Although these elements are essential, their excessive use poses significant risks to human health and the environment. Consequently, the advent of ROHS testing instruments has greatly facilitated the detection of metallic elements.
