[DePu Instruments] – A manufacturer specializing in testing instruments for RoHS compliance, heavy metals, alloy analysis, halogens, and more!
Product Inquiry:19926823034(WeChat ID is the same)
- All
- Product Management
- News and Information
- Introduction Content
- Corporate outlets
- Frequently Asked Questions
- Corporate Video
- Corporate Portfolio
RoHS 2.0 instrument RoHS 1.0 instrument
Alloy analyzerCoating Analyzer
The development prospects and future of high-performance liquid chromatography!
发布时间: 2022-06-17 13:44
In terms of the development of instrumentation technology, although High-performance liquid chromatograph Significant progress has been made, yet compared with gas chromatographs, high-performance liquid chromatography still lags behind. Enhancing the instrument’s versatility, sensitivity, and specificity remains a key focus for future research and development.

Meanwhile, with the rapid advancement of science and technology, detector‑combination techniques have also become increasingly mature. It is often difficult to obtain complete information using a single detector alone. To achieve ever more accurate qualitative and quantitative results in single‑column liquid chromatography, in addition to enhancing detector performance through emerging technologies, combining different detectors represents a viable and effective approach. This strategy leverages the strengths of each detector, enabling the acquisition of increasingly precise data from a single chromatographic injection. Since the 1980s, researchers have developed hyphenated techniques such as liquid chromatography–mass spectrometry, inductively coupled plasma optical emission spectroscopy, Fourier‑transform infrared spectroscopy, atomic absorption spectroscopy, and nuclear magnetic resonance spectroscopy. For high‑performance liquid chromatography, which has traditionally been limited to single‑mode detection, these advances pose new challenges and open up promising avenues for further research.
In the high-performance liquid chromatography (HPLC) instrument market, mainstream players in China are predominantly established foreign brands. Domestic HPLC instruments are mainly produced by well-known manufacturers such as Shenzhen Depu, yet their market share remains relatively low. With the domestic high-end segment dominated by foreign equipment, it has become a reality that foreign manufacturers are increasingly expanding into the mid- and low‑end markets. Although Chinese manufacturers have made significant strides in instrument design, production processes, and manufacturing capabilities—indeed, some products now rival foreign offerings in appearance—their innovation in core technologies still lags behind.
With the advancement of science and technology and the continuous improvement of technical capabilities, the prospects for high-performance liquid chromatography are generally optimistic and on the rise. Compared with earlier liquid chromatographic methods, it has undergone significant improvements, and many scientists have achieved new breakthroughs in addressing longstanding analytical challenges. Ongoing technological progress and product innovations have brought greater convenience to society. Recently, several cutting-edge detection instruments have been successfully integrated into high-performance liquid chromatography, further expanding its applications and enabling full exploitation of its advantages—high efficiency, speed, excellent selectivity, and high sensitivity—thus establishing a robust platform for HPLC analysis. This approach allows for more systematic component analysis. By combining mass spectrometry, gradient elution, column-switching techniques, advanced detection methodologies, and molecular biology, this method plays a pivotal role in analytical and diagnostic applications.
In general, the development of high-performance liquid chromatography has entered a relatively mature stage, with numerous technologies undergoing continuous innovation. For Chinese enterprises, it is essential to place greater emphasis on intellectual property protection, product‑technology upgrades, and the advancement of large‑scale production techniques in this field, while also optimizing and integrating processes within the chromatography industry. We are confident that, as China’s overall national strength continues to grow, the variety, quality, and market competitiveness of liquid chromatographs produced by Chinese universities will see genuine improvements.
Latest News
Recommended Products
Frequently Asked Questions
What is RoHS?
RoHS is a mandatory standard established by EU legislation, officially known as the “Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment.” The standard entered into force on July 1, 2006, and primarily aims to regulate the materials and manufacturing processes of electrical and electronic products, thereby promoting human health and environmental protection.
The purpose of this standard is to eliminate six substances—lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers (note: the correct Chinese term for PBDE is “polybrominated diphenyl ethers”; “polybrominated biphenyl ethers” is an incorrect designation)—and specifically stipulates that the cadmium content must not exceed 0.01%.
The latest RoHS Directive has added four new phthalate‑ester testing items: DEHP—di(2‑ethylhexyl) phthalate; BBP—butyl benzyl phthalate; DBP—dibutyl phthalate; and DIBP—diisobutyl phthalate.
What are the limit values for the ten hazardous substances under RoHS?
1. Cadmium: less than 100 ppm.
2. Lead: less than 1000 ppm.
3. Mercury: less than 1000 ppm.
4. Hexavalent chromium: less than 1000 ppm.
5. Polybrominated biphenyls (PBB): less than 1000 ppm.
6. Polybrominated diphenyl ethers (PBDEs): less than 1000 ppm.
7. Di(2-ethylhexyl) phthalate (DEHP): less than 1000 ppm.
8. Butyl benzyl phthalate (BBP): less than 1000 ppm.
9. Dibutyl phthalate (DBP): less than 1000 ppm.
10. Diisobutyl phthalate (DIBP): less than 1000 ppm.
What instruments are typically used for RoHS testing?
The commonly used analytical instrument for RoHS 1.0 is X-ray fluorescence spectroscopy (XRF). XRF analyzers are available in standalone, benchtop, and handheld configurations. Typically, a handheld XRF analyzer is employed first for portable on-site testing, with a focus on components of the product that pose a higher risk of containing restricted substances.
With the introduction of RoHS 2.0, four phthalate esters have been added to the RoHS Directive, necessitating additional testing to determine the levels of these compounds, which are extracted using solvents. The solvent extracts are then analyzed for the presence of phthalates by gas chromatography–mass spectrometry (GC/MS) or gas chromatography with flame ionization detection (GC/FID). Other elements and polybrominated diphenyl ethers/alkylated elastomers are analyzed using comparative methods and GC/MS, respectively.
Do the ten RoHS items require two instruments for testing?
The ten items specified in RoHS require two instruments for testing.
For the ten‑item RoHS testing, two instruments are required to complete the analysis; a single instrument cannot achieve this. Even if one instrument is used to measure heavy metal content, the other must be employed to analyze organic compounds.
X-ray fluorescence spectrometers are used to detect RoHS 1.0, while chromatographs, pyrolyzers, or hyphenated techniques such as GC–MS are employed to analyze the four phthalates specified in RoHS 2.0. At present, no single instrument can independently perform all the tests required for RoHS 2.0.
Can ROHS testing instruments detect metallic elements?
ROHS testing instruments are specialized devices used to detect the presence of hazardous substances in electronic components, household appliances, toys, and other products. These harmful substances can pose long-term risks to both human health and the environment, making the use of ROHS testing equipment of paramount importance.
Regarding whether ROHS testing instruments can detect metallic elements, the answer is yes. This is because ROHS testing covers not only hazardous substances but also the analysis of metallic constituents in compliant products. These metals include lead, cadmium, mercury, and others, which are widely used during the manufacturing process. Although these elements are essential, their excessive use poses significant risks to human health and the environment. Consequently, the advent of ROHS testing instruments has greatly facilitated the detection of metallic elements.
